Are you looking for best planet audio car audio subwoofers, we’ve consulted top experts who has in-and-out knowledge about the planet audio car audio subwoofers. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best planet audio car audio subwoofers.
This list is undoubtedly the best planet audio car audio subwoofers available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good planet audio car audio subwoofers, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a planet audio car audio subwoofers.
Best planet audio car audio subwoofers – The Winners!
List of Top 10 Best planet audio car audio subwoofers In Detailed
- Power - 1500 Max x 1 @ 2 Ohms, 700 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Specs - Dimensions: 10” x 10” x 2.4”, Weight: 6.75 lbs.
- 3-digit, super bright LED voltage meter
- Blue illuminated display
- Voltage measurement accurate to +/- 0.1VCD
- Warning tones for - Reverse polarity connection, Over-voltage limit, Low battery voltage
- Capacitance / Microfarads - 10,000,000, Working Voltage - 16VCD
- Surge Voltage - 20VCD
- Equivalent Series Resistance – 0.015 Ohm @ 120Hz/25ºC
- Capacitance Tolerance - =/- 10%
- CONE: Made From Polypropylene, The AC8D 8 Inch Car Subwoofer Provides a Resilient And Durable Material That Can Offer Great Sound With The Advantage Of Long Lasting Subwoofers
- VOICE COIL: Our Voice Coils Are Able To Withstand High Temperatures Yet Maintain Its Strength And Fatigue Properties. Making Our Voice Coils With This Material, Gives Our Speakers The Advantage Of Longer Pay Times With Lower Weights
- SURROUND: Foam is very flexible, providing the subwoofer with higher efficiency. This also translates to better excursion. (How far the cone of a speaker linearly travels from its resting position).
- STAMPED BASKET: The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear music output
- SPECIFICATIONS: Resonant Frequency - 39 Hz, Sensitivity SPL (1W/1m) - 85 Db
- DIMENSIONS: Depth 9” x Width 9” x Height 4.5”
- Power - 4000 Max x 1 @1-Ohm, 2000 Max x 1 @2-Ohms, 1000 Max x 1 @4-Ohms, 8000 Max x 1 @2-Ohms strapped
- MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- Strapping Capable - You are able to strap two PL4000.1D amplifiers and double the power that is being sent to your subwoofers. You now have the ability to connect more subwoofers to take advantage of the extra power
- Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Specs - Dimensions: 13.90” x 7” x 2.39”, Weight: 8.2 lbs., Speaker Impedance: 1 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 100 dB, Frequency Response: 15 Hz to 250 Hz, Fuse Quantity: 3 40 Amp ATO Blade
- Power - 200 Watts Max x 4 @2-Ohms, 100 Watts Max x 4 @4-Ohms, 400 Watts Max x 2 Bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs - Dimensions: 10” x 10” x 2.4”, Weight: 6.6 lbs.
- 1200 W MAX Power, 4 Channel 225 W X 4 RMS @ 2 ohm 113 W X 4 RMS @ 4 ohm 450 W X 2 RMS Bridged @ 4 ohm
- Full Range Class A/B, MOSFET Power Supply
- High and Low Level Inputs
- Fixed High Pass Crossover, Variable Low Pass Crossover, Variable Bass Boost.6 Year Platinum Dealer Warranty
- Frequency Response:20 Hz to 20 kHz ±1 dB
- Dimensions: 8.23 x 8.23 x 4.17 inches, Item Weight: 3.97 Lbs.
- Impedance: 4 ohms, Frequency Response: 60Hz
- Sensitivity: 88 dB @ 1 watt/1 Meter
- Mounting Depth: 3.78 inches, Mounting Hole: 7.2 inches
- Polypropylene cone, Stamped Basket
- Rubber Surround, 2-inch Voice Coil
- Planet Audio provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
- Power - 3000 Max x 1 @ 1 Ohm, 1500 Max x 1 @ 2 Ohms, 750 Max x 1 @ 4 Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- Strapping Capable - You are able to strap two AR3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
- Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”
- Bluetooth - Play and control music through your smartphone or MP3 player as well as apps like Spotify / Pandora, wirelessly
- Weatherproof - The PGR35B has been outfitted with the latest weatherproofing techniques such as front panel UV coating, PC board with conformal coating
- Media Playback - Bluetooth, play music via the USB port or tune into the AM / FM radio stations for up to date music/news/sports and more. The PGR35B does not have a CD or DVD mechanism. USB Charging available
- Inputs - The USB port gives you the option to have a vast library of audio files at your fingertips. The auxiliary input is compatible with audio output from smartphones and MP3 players
- Outputs - Use the front / rear & subwoofer pre-amp outputs to hook up your speakers or subwoofer
- Specs - Dimensions: 3.8” x 3.5” x 3.5”, Weight: 1.8 lbs.
- Capacitance: 2,000,000 F (2 Farad), Low E.S.R (Equivalent Series Resistance): <0.004
- Audible Warning: Reverse, Polarity, Voltage Overload, and Low Battery Voltage
- 3-Digit, Super Bright LED Digital, Voltage Meter, Red Illuminated Display, Nickel Finish Terminals
- Mounting Brackets, Included, Rated Voltage: 12VDC, Max Voltage: 16VDC
- Planet Audio provides a powerful 1 year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality