Are you looking for best audiocontrol sa-3055, we’ve consulted top experts who has in-and-out knowledge about the audiocontrol sa-3055. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best audiocontrol sa-3055.
This list is undoubtedly the best audiocontrol sa-3055 available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good audiocontrol sa-3055, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a audiocontrol sa-3055.
Best audiocontrol sa-3055 – The Winners!
List of Top 10 Best audiocontrol sa-3055 In Detailed
SaleBestseller No. 1
AudioControl ACX-BT1 All-Weather Bluetooth Streamer
- High Definition Low-Latency Audio Streaming
- 24 bit / 48 kHz Audio Streaming from Devices with aptX Codec
- IPX5 rated enclosure
- Built in fuse
SaleBestseller No. 2
Audio Control ACR3 Remote for Audio Control Processors
- This wired remote (ACR-3) allows you to easily change the input source, adjust the auxiliary input volume, and adjust the output level of channel 4 (often used for a subwoofer) of the AudiControl LC8i. The remote is designed to be dash mounted, within reach of the driver; it can be mounted under the dash with the supplied bracket, or the bracket can be removed and the knob and LED can be custom mounted through the dash. Pressing the knob engages the auxiliary input.
- Compatible with: LC8i 8-channel line converter, DQ-61 factory sound processor, DQDX digital signal processor, D-4.800 4-channel amp and DSP, D-6.1200 6-channel amp and DSP, DM-608, DM81 digital signal processors, & The Epicenter Amplifiers.
- Mounting Options: The dash control may be mounted under the dash using its own bracket or through a custom hold in the dash. It should be within reach of the driver and in a spot where the LED is plainly visible
- Bracket Installation: The dash control mounts with two screws, which attach to the underside of the dashboard. Slide under the dash and place the dash control in its mounting position, mark the two mounting holes, drill pilot holes, and secure with two screws.
- Custom Installation: For that custom, finished look, the dash control can be flush mounted directly on the dash-board (or anywhere else). Disassemble the dash control from the mounting bracket. Start by pushing the LED from its holder followed by removing the circuit board and rotary control from the bracket. Drill a 9/32" hole in the dashboard for the control along with a 1/8" hole for the lock tab and a 13/54" hold for the LED holder. Reassemble the dash control components on the dashboard.
Bestseller No. 3
AudioControl AC-BT24 Bluetooth Streamer & Programmer for AudioControl DSP Products Featuring The Option Port
- for streaming and DSP control
- plugs into Option Port of select AudioControl processors:
- plugs into Option Port of select AudioControl processors: DM-608, DM-810, DM-RTA, and D-6.1200
SaleBestseller No. 4
AudioControl ACR-U Remote Control for Select Products
- 2-channel RCA inputs and outputs
- adjusts from 0 to -97dB
- remote disassembles for flush-mounting
SaleBestseller No. 5
Audio Control ACR2 Remote for Audio Control Processors
- Remote for Audio Control Processors Remote control assembly with 20 foot cable and mounting plate.LC7DQL-8LCQ-1The Epicenter Plus
- LC7DQL-8LCQ-1The Epicenter Plus
- LC7DQL-8LCQ-1The Epicenter Plus
SaleBestseller No. 8
AudioControl ACM-4.300 4-Channel Micro Amplifier
- Reversible cover plates allow flexible mounting options
- Active speaker-level inputs for OEM integration
- Linkwitz-Riley Crossover
- RCA Line Inputs
Bestseller No. 9
AudioControl ACM-1.300 Monoblock Micro Amplifier with Accubass
- Active speaker-level inputs for OEM integration
- Linkwitz-Riley Crossover
- Reversible Cover Plate
- Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer)
SaleBestseller No. 10
Audio Control DQ-61 OEM Sound Processor
- DQ-61 - AudioControl 6-Channel Factory Sound Processor with EQ and Signal Delay
- Designed to work with any factory stereo
- 6 speaker-level inputs (each can handle up to 400 watts RMS of power)
- Input level controls with maximization indicator LED
- Dimensions: 8-5/8"W x 1-1/4"H x 5"D