Are you looking for best scope rings for cz 527, we’ve consulted top experts who has in-and-out knowledge about the scope rings for cz 527. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best scope rings for cz 527.
This list is undoubtedly the best scope rings for cz 527 available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good scope rings for cz 527, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a scope rings for cz 527.
Best scope rings for cz 527 – The Winners!
But these three has some more competitions too, Check out below List of Top 10 best scope rings for cz 527.
If you are ready to choose a new scope rings for cz 527, check out our recommendations for the best scope rings for cz 527. But if you’d like to learn more about the various types of scope rings for cz 527 available and how to choose the right one for you, read on.
List of Top 10 Best scope rings for cz 527 In Detailed
- These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.
- Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Do not recommend the Hunter Rings for use on heavy recoiling rifles.
- Made from aircraft-grade 6061-T6 aluminum for optimum strength. Torque Specs: Base Clamp Screws-25-30 in/lbs, Ring Screws-15 in/lbs.
- Sold two rings per package.
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
- Perfect for All 21mm Picatinny/ Weaver Rails: This set includes 2 pieces medium profile and 2 pieces high profile. Suitable for all 1 inch / 25.4mm scope tube.
- Built-in Tape Protection: Not only can it prevent the scope from being scratched, but also the scope moving forward due to the recoil force of multiple shots.
- Lightweight: Aluminum alloy with black anodized surface, sturdy and lightweight. The hollowed out is designed to be extremely lightweight and provide potential vision.
- Rail Clamp Screw Design: With 1 rail clamp screw and 2 scope clamp screws perside, ensure mount all 1 inch scope firmly. Comes with 2 pieces allen wrench.
- Size Detail: Medium Profile Dimension: 1.9 x 1.6 x 0.8 inch, Weight: 2 ounce; High Profile Dimension: 2.0 x 1.6 x 0.8 Inch, Weight: 2 ounce.
- These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0.95 inches (24.13 mm) from the base. Sold two rings per package. Made in the USA.
- The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.
- Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.
- Fits Weaver and Picatinny Rails | Weight (Per Ring): 45.92 Grams - 1.62 oz
- Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.
- 【Perfect for All 21mm Picatinny Rails】LONSEL 1'' Picatinny Scope Ring Mounts include 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube.
- 【1 Inch Scope Rings】Perfect fit for 1" scope tube. 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
- 【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- 【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance.
- 【Rail Clamp Screw Design & Easy To Install】With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 21mm rail, simple and quick to remove or install. Comes with 1 pcs allen wrench and 1 pcs spare screws.
- Double dovetail rings for 11mm dovetail mount specialized scope mount for .22/Airgun.
- One of the dovetail mounts features a stop pin, for rock solid application. Adopt anti-oxidation and anti-corrosion coating treatment.
- Medium profile, 15mm(0.6 in) from top of the rail to bottom of scope rings ( Item height: 1.6'').
- The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube.
- With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment.
- Double scope ring mount for Picatinny/ Weaver Rail (21mm).
- Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'')
- With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily.
- 1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
- Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes
- Available with either Picatinny or Weaver standard base
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch
- Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm).
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'')
- With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily.
- 【Perfect 1" Scope Rings For 11mm Dovetail Rails】LONSEL1'' Dovetail Scope Ring Mounts include 2 pcs high profile in one package. These scope rings fit for 3/8'' or 11mm dovetail rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. A must have scope rings for hunting shooting!
- 【1 Inch Scope Rings】Perfect fit for 1" scope tube. 2 Pcs High Profile: 0.82'' gap from base of mount to bottom of ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz per ring.
- 【Built-In Tape Protection & With Stop-Pin Design】 Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings have a stop pin the bottom, Which prevents the ring from sliding once set.
- 【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field.
- 【Rail Clamp Screw Design & Easy To Install】With 2 rail clamp screws and 4 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 11mm dovetail rail, simple and quick to remove or install. Comes with 1 pcs allen wrench and 1 pcs spare screws.
- 【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!
- 【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring; 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
- 【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
- 【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field.
- 【Rail Clamp Screw Design & Easy To Install】With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 21mm rail, simple and quick to remove or install. Comes with 2 pcs allen wrench.
Hope this list of the best scope rings for cz 527 will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.