Are you looking for best raid controllers, we’ve consulted top experts who has in-and-out knowledge about the raid controllers. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best raid controllers.
This list is undoubtedly the best raid controllers available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good raid controllers, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a raid controllers.
Best raid controllers – The Winners!
But these three has some more competitions too, Check out below List of Top 10 best raid controllers.
If you are ready to choose a new raid controllers, check out our recommendations for the best raid controllers. But if you’d like to learn more about the various types of raid controllers available and how to choose the right one for you, read on.
List of Top 10 Best raid controllers In Detailed
SaleBestseller No. 1
SABRENT NVMe M.2 SSD to PCIe X16/X8/X4 Card with Aluminum Heat Sink (EC-PCIE)
- Screws & screwdriver Included.
- SSD Bus interface: NVMe (not compatible with SATA M.2 SSD).
- SSD form factor: M.2 M-Key (Not compatible with B-Key SSD).
- PCI Express Physical interface: PCIe x16/x8/x4 slot. Logical Interface / PCIe Lanes: X4.
- Compatible Sizes: 2230 / 2242 / 2260 / 2280. NOTE: It will not fit the PCIe x1 slot.
Bestseller No. 2
ELUTENG PCIE SATA Expansion Card 2 Port SATA PCIE Card 6GB/s PCI-E X1 SATA 3.0 Controller Plug and Play PCIE to SATA Adapter for Desktop PC Support SSD HDD
- 【SATA expansion card 2 ports】This PCIE SATA card has two SATA 3.0 ports with 6Gbps transfer speed, suitable for both large/small PC cases, compatible with Windows 11 /10 /8 /7 /Vista /MAC / NAS / Linux OS etc, for PCI Express X1 X4 X8 X16. Note: Only MBR boot is supported, UEFI boot is not supported.
- 【Excellent heat dissipation】The PCIE SATA expansion card built-in alloy material heatsink with large area to effectively dissipate excess heat, so that the two SATA ports are always at room temperature and work more stably.
- 【High Efficiency Performance】Supports AHCI mode and NCQ capabilities, this sata expansion card allowing you to increase the overall performance of your hard disk by 5-20%. Supports hot-swapping and IDE mode (programming interface)
- 【Durable and Stable】15U gold-plated conductor improves conductivity and reduces wear and tear, ensuring faster and more stable transmission. Thick PCB board resists high and low temperatures and will not deform after prolonged use.
- 【Support System】 Compatible with Windows 7/8 (32/64 bit), Vista/11/10/MAC/linux. Does not support XP/Server 2003. Equipped with a replaceable bezel to support 4U/2U chassis. Windows(R) XP/Server2003Note: Please make sure the product is compatible with your computer before purchasing. For products with SATA interface, WIN10/11 does not need to install the system, and if you use WIN7, WIN8 and blue screen happens, you need to reinstall the system
Bestseller No. 3
LSI Broadcom SAS 9300-8i 8-port 12Gb/s SATA+SAS PCI-Express 3.0 Low Profile Host Bus Adapter
- 2 x SFF-8643 mini-SAS HD Internal Connectors
- Up to 12Gb/s
- Improved Connectivity
- High Performance
- Easy Installation
Bestseller No. 4
GLOTRENDS PA41 Quad M.2 PCIe 4.0 NVMe Adapter, Support 4 NVMe M.2 SSD (22110/2280/2260/2242/2230 Size), Without PCIe Splitter Function (PCIe Bifurcation Motherboard is Required)
- Quad M.2 PCIe SSD Host Adapter: add 4 x M.2 PCIe (NVMe/AHCI) SSD (M-Key) onto a single PCIe X16 host adapter, so you can access 4 x M.2 PCIe SSD individually, or setup soft RAID in windows/Linux/3rd party software.
- M.2 PCIe RAID for Intel/AMD Platform : Support M.2 NVMe SSD RAID-on-CPU (VROC) in Intel Platform, but you need to purchase Intel VROC license by yourself. Support M.2 NVMe RAID in AMD Platform. Not compatible with Mac Pro 5.1
- Note: Without pcie splitter function in this host adapter (ASM1184E chip), so motherboard must support PCIe Bifurcation. Otherwise, only one M.2 PCIe SSD will be recognized. If you are not sure PCIe Bifurcation of your motherboard, please consult motherboard munufacture or contact us via amazon message
- Please setup pcie splitter in BIOS/UEFI into X4X4X4X4 (Compatible with Hyper M.2 X16 mode in ASUS). Number of M.2 PCIe SSD may vary depending on different CPUs and motherboards.
- Chipset support PCIe Bifurcation: Intel Platform X299, C422, C621, Z390, Z370, Z490, Z590, Z690, X99； AMD Platform TRX40, X399, X570, X470, B550, B450, Z590, etc.
- Please make sure BIOS/UEFI support native NVMe and OS boot from PCIe lane, then this Quad M.2 PCIe SSD Host Adapter support OS boot from M.2 PCIe SSD or M.2 PCIe RAID.
- Compatible with PCIe 4.0/3.0/2.0 motherboards, and install into PCI-Express X16 lane. To reach PCIe 4.0 speed, make sure your CPU and motherboard and PCIe SSDs are all PCIe 4.0 enabled. To reach PCIe X16 full bandwidth, setup 4 x M.2 PCIe SSD into RAID 0 mode.
- Work with 2230/2242/2260/2280/22110 size M.2 PCIe SSD (Key-M), compatible with Samsung 980/ 970 PRO/ 970 EVO Plus/ 970 EVO; compatible with Intel Optane SSD P1600X Series , 6 Series ; compatible with WD_BLACK SN750 SE, Blue SN550, Green SN350, etc. Note: not support M.2 SATA SSD (Key-B).
SaleBestseller No. 5
StarTech.com 2 Port PCI Express SATA 6 Gbps eSATA Controller Card - Dual Port PCIe SATA III Card - 2 Int/2 Ext - SATA III 6Gbps (PEXESAT322I)
- IMPROVE STORAGE CAPACITY: This 2-Port PCIe SATA and eSATA Controller Card enables support of two internal SATA or external (eSATA) drives through PCI Express; A cost-effective solution to increase your system's storage capacity
- ASM1061 CONTROLLER: This SATA and eSATA controller card features a dedicated chipset to enable two switchable SATA and eSATA 6Gbps ports via a single x1 PCIe slot; Supports FIS-based Port Multiplier, Command-based switching, NCQ, and ATA/ ATAPI commands
- WIDE COMPATIBILITY: Supports Windows and standard SATA and eSATA SSDs (solid-state drives) and HDDs (hard drives); Supports SATA III (6 Gbps) and earlier revisions; Compliant with PCI Express 2.0
- CONVENIENT SETUP: This 2-port SATA/eSATA controller card installs in a full or low-profile PCIe slot; Compatible with PCIe x1, x4, x8, or x16 slots; Includes full-profile (pre-installed) & low-profile brackets, and 7-pin SATA cable
- THE IT PRO'S CHOICE: Designed and built for IT professionals, this 2-Port SATA and eSATA Controller Card is backed for 2 years, including free lifetime 24/5 multi-lingual technical assistance
Bestseller No. 6
BEYIMEI PCIE 1X SATA Card 10 Ports,6 Gbps SATA 3.0 Controller PCIe Expansion Card,Non-Raid,Support 10 SATA 3.0 Devices,with Low Profile Bracket and 10 SATA Cables（Chip:ASM1166）
- 【10 Ports PCI-E to SATA 3.0】：This PCIE SATA CARD allows you to add 10 SATA 3.0 6Gbps devices to your computer. No need to drive, plug and play.
- 【PCI-Express X1 interface】Compatible with PCI-Express X1 /X4 /X8 /X16 slots.(Recommended under PCI-E 3.0, faster use)
- 【Powerful chip】: ASMedia ASM1166 Chip, with heat sink, long-lasting high temperature resistance, high-speed and stable transmission.
- 【System support】: Compatible with Windows/8/10/Ubuntu/Linux.Support SATA interface hard disk/optical drive/SSD solid state drive.
- Compatible with SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps)。Comply with PCI-Express 3.0 specification and backward compatible with PCI-Express 2.0.
Bestseller No. 7
GLOTRENDS PA21 Dual M.2 PCIe 4.0 NVMe Adapter, Support 2 NVMe M.2 SSD (22110/2280/2260/2242/2230 Size), Without PCIe Splitter Function (PCIe Bifurcation Motherboard is Required)
- Dual M.2 PCIe SSD Host Adapter: add 2 x M.2 PCIe (NVMe/AHCI) SSD (M-Key) onto a single PCIe X8 host adapter, so you can access 2 x M.2 PCIe SSD individually, or setup soft RAID in windows/Linux/3rd party software
- M.2 PCIe RAID in Intel and AMD: Support M.2 NVMe SSD RAID-on-CPU (VROC) in Intel Platform, but you need to purchase Intel VROC license by yourself. Support M.2 NVMe RAID in AMD Platform. Not support Mac Pro 5.1
- Note: Without pcie splitter function in this host adapter (ASM1182E chip), so motherboard must support PCIe Bifurcation. Otherwise, only one M.2 PCIe SSD will be recognized. If you are not sure PCIe Bifurcation of your motherboard, please consult motherboard munufacture or contact us via amazon message
- Please setup pcie splitter in BIOS/UEFI into X4X4X4X4 or X4X4X8 or Hyper M.2 X16 mode. Note: X8X4X4 mode will not work.
- Chipset support PCIe Bifurcation: Intel Platform X299, C422, C621, Z390, Z370, Z490, Z590, Z690, X99; AMD Platform TRX40, X399, X570, X470, B550, B450, Z590, etc.
- Please make sure BIOS/UEFI support native NVMe and OS boot from PCIe lane, then this Dual M.2 PCIe SSD Host Adapter support OS boot from M.2 PCIe SSD or M.2 PCIe RAID
- Compatible with PCIe 4.0/3.0/2.0 motherboards, and install into PCI-Express X8/16 lane. To reach PCIe 4.0 speed, make sure your CPU and motherboard and PCIe SSDs are all PCIe 4.0 enabled. To reach PCIe X8 full bandwidth, setup 2 x M.2 PCIe SSD into RAID 0 mode
- Work with 2230/2242/2260/2280/22110 size M.2 PCIe SSD (Key-M), such as Samsung: 980/ 970 PRO/ 970 EVO Plus/ 970 EVO; Intel Optane SSD P1600X Series , Intel SSD 6 Series ;Western Digital: WD_BLACK SN750 SE, WD Blue SN550, WD Green SN350, etc. Note: not support M.2 SATA SSD (Key-B)
SaleBestseller No. 8
Bestseller No. 9
Internal PCI Express SAS/SATA HBA RAID Controller Card, SAS2008 Chip, X8, 6Gb/s, Same as SAS 9211-8I
- Controller: LSI SAS 2008 6Gbps SAS/SATA HBA RAID Controller Card
- PCIE 2.0 (6.0 Gb/s), X8 Lane; 2x Mini SAS SFF-8087 Ports
- Up to 6 G SATA and SAS link rates, SAS 2.0 complian; Support 256 SAS and SATA device;
- Driver CD is included natively, you also can download it from 10Gtek website
- What You Get: 10Gtek LSI-2008-8I HBA Card x1, Driver CD x1, Low-profile Bracket x1. Backed by 10Gtek 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support.
Bestseller No. 10
FebSmart PCIE 3.0 to 4-Ports 6Gbps SATA III Expansion Card for Desktop PCs, ASMedia ASM1064 None-Raid PCIE 3.0 SATA III Host Controller, Plug and Play on Windows OS, MAC OS, Linux System (FS-S4-Pro)
- 1.The FS-S4-Pro is a PCIE X1 interface to 4-Ports 6 Gbps max speed SATA III expansion card. It allows users add 4X NONE-RAID SATA 3.0 storage or AHCI BOOT UP HDDs/SSDs on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS).
- 2. Select the ASMedia ASM1064 the most stable NONE-Raid PCIE 3.0 SATA III host controller. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI BOOT UP or storage HDDs/SSDs.
- 3. Compatible with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA III 6Gbps max speed. Backward compatible with SATA 1.0 1.5Gbps speed and SATA 2.0 3Gbps speed. Support PCIE 1.0, 2.0, 3.0, 4.0 protocol, will works on PCIE X1, X2, X4, X8, X16 slot.
- 4. Plug and Play on Windows 11, 10, 8.x, 7, Vista, XP (32/64bit) and Windows Server 2022, 2019, 2016, 2012R2, 2012, 2008R2, 2008, 2003R2, 2003 (32/64bit). MAC OS 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems.
- 5. ATTENTIOM: 1. This PCIE SATA III card was set on AHCI BOOT UP mode, make sure now PCs disk in AHCI BOOT UP mode or will report Blue Screen Death (BSD). 2. Make sure PCs power supply unit (PSU) can provide 4X max SATA interface power supply for HDDs/SSDs.3. Users must make sure Motherboards have at least one PCIE slot before purchase. 4. Slim PCs need user change to low profile bracket.
Hope this list of the best raid controllers will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.