{Updated} Top 10 Best alpine subwoofer for jeep {Guide & Reviews}

Are you looking for best alpine subwoofer for jeep, we’ve consulted top experts who has in-and-out knowledge about the alpine subwoofer for jeep. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best alpine subwoofer for jeep.

This list is undoubtedly the best alpine subwoofer for jeep available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good alpine subwoofer for jeep, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a alpine subwoofer for jeep.


Best alpine subwoofer for jeep – The Winners!


But these three has some more competitions too, Check out below List of Top 10 best alpine subwoofer for jeep.

If you are ready to choose a new alpine subwoofer for jeep, check out our recommendations for the best alpine subwoofer for jeep. But if you’d like to learn more about the various types of alpine subwoofer for jeep available and how to choose the right one for you, read on.


List of Top 10 Best alpine subwoofer for jeep In Detailed


Bestseller No. 1
Alpine Electronics SBV-10-WRA Pre-Loaded 10" Subwoofer System for 2007-2018 Jeep Wrangler JKU
  • The SBV-10-WRA is a 10-inch subwoofer pre-loaded into a sealed enclosure designed to fit under the front passenger’s seat of the 2007-2018 JKU.
  • The lower frequency sound loads into the passenger’s foot well to deliver quality sound and maximized bass extension even when the Wrangler’s top is off.
  • The subwoofer’s power handling of 300W RMS/900W Peak delivers dependable, well-rounded bass performance.
  • The SBV-10-WRA is weather resistant and rugged, rated at IP66 so it’s protected from total dust ingress and water from any direction.
  • The SBV-10-WRA is an Authorized Online Product, visit the store locator on the Alpine USA website for professional installation.
SaleBestseller No. 2
Alpine Electronics PSS-23WRA Powered Sound System Upgrade for 2018-Up 4-Door Jeep Wrangler JL Without The Factory Upgraded Sound System
  • The PSS-23WRA is a 300-watt sound system upgrade for 2018-up 4-door Jeep Wrangler JL models without the factory upgraded sound system.
  • Included are a powered subwoofer, power Pack amplifier, 2” tweeters, a remote bass knob, and Installation accessories.
  • The system provides an impactful bass Boost, even when the Wrangler’s top is off.
  • The PSS-23WRA is compatible with an Alpine or aftermarket head unit, or with the factory Jeep base radio.
  • The PSS-23WRA is an authorized online product Sold by and shipped from Amazon; visit the store locator on the Alpine USA website for professional installation.
Bestseller No. 3
Alpine Electronics PWE-S8-WRA Powered Subwoofer for 2011-Up Jeep Wrangler
  • Easy bass upgrade for 2011-Up 4-door Jeep Wranglers without the premium sound system with factory subwoofer.
  • The system consists of the PWE-S8 8-inch powered subwoofer, custom bracket for under-the-seat mounting, subwoofer level knob, and a JK-specific wiring harness.
  • The PWE-S8 subwoofer has a 25Hz-152Hz frequency response and a power rating of 120W RMS.
  • The system is compatible with an Alpine or aftermarket head unit, or with the factory radio.Not compatible with the factory equipped subwoofer system
  • The PWE-S8-WRA is an Authorized Online Product Sold By and Shipped from Amazon; visit the store locator on the Alpine USA website for professional installation.
Bestseller No. 4
Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with MRV-M500 Amplifier, Wire kit and bass knob
  • Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required
  • Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction
  • OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness
  • Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
  • Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Bestseller No. 5
Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with PDR-M65 Amplifier, Wire kit and bass knob
  • Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required
  • Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction
  • OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness
  • Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
  • Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Bestseller No. 6
Alpine Electronics PWE-S8 Restyle Compact Powered 8-Inch Subwoofer , black
  • 8-inch subwoofer and 120W amplifier, housed together in a cast aluminum enclosure
  • The compact size measures just 13.5” L x 9” W x 3” D so it can be installed under or behind a seat in a truck, in a sedan’s trunk or in an SUV’s hatch
  • 32Hz-150Hz frequency response, Power Rating: 120W RMS. RCA (0.1-4V) / Speaker Input (1.5-30V/auto sensing)
  • RCA and Auto-sensing Speaker Level Inputs are located on the side panel, along with controls for Phase, Gain, LP Crossover and Remote Sub Level
  • The PWE-S8 is an Authorized Online Product Sold By and Shipped from Amazon; visit the store locator on the Alpine USA website for professional installation
Bestseller No. 7
Alpine SBV-10-WRA Pre-Loaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU with Panel Tool Kit
  • 10-inch subwoofer pre-loaded into a sealed, custom-fit enclosure
  • Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required
  • Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction
  • OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness
  • The 300W RMS/900W max power rating is a match for the KTA-30MW Mono Tough Power Pack Amplifiers (sold separately)
Bestseller No. 8
Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with S-A60M Amplifier, Wire kit
  • Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required
  • Subwoofer Enclosure, Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction
  • OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness
  • The S-Series amplifiers were designed to perfectly complement the already established and loved S-Series speaker and subwoofer line that Alpine Electronics has continually improved for years.
  • Power output 2-Ohm @ 14.4 Volts: 600 W RMS X 1
Bestseller No. 9
ALPINE SPV-65X-WRA 6.5" Speakers for 2007-2018 Jeep Wrangler JK + Underseat Sub
  • (1) Alpine SPV-65X-WRA Weather Resistant 6.5" Speakers for 2007-18 Jeep Wrangler JK. (1) Rockville SS8P 400w 8" Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. ALPINE SPV-65X-WRA Weather Resistant 6.5" Speakers for 2007-18 Jeep Wrangler JK. 6.5-inch speakers which can be installed as a component or coaxial system, using the included adapters. CTA-2031 Power Rating: 75W RMS, 225W Peak
  • Nominal impedance 4 Ohm. Frequency response 65-22kHz. 1 Teteron dome tweeter. Steel frame with factory speaker mounting tabs. Weather resistant: IP55. Includes vehicle specific speaker connectors. Add your content...Max RMS Power Capacity: 75W. Peak Power Capacity: 225W. Features: Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub
  • Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit
  • Green Power/Red Protect LED. Phase Switch: 0 or 180. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 10A. Specifications: Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 2 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz
  • Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
Bestseller No. 10
Alpine 10" Weather Proof Subwoofer+Amp For 2011-2018 Jeep Wrangler JK 4-Door
  • "(1) Alpine Loaded 10"" Weather Proof Subwoofer For 2011-2018 Jeep Wrangler JK 4-Door. (1) Alpine KTA-30MW 600 Watt Mono Amplifier Class-D Amp For Polaris RZR/ATV/UTV/Cart. Features: Alpine Loaded 10"" Weather Proof Subwoofer For 2011-2018 Jeep Wrangler JK 4-Door"
  • 10" subwoofer Pre-loaded into a sealed, custom-fit enclosure. Designed to be pressure fit under the front passengers seat rails, no mounting hardware is required. Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction
  • OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness. Nominal Impedance: 2 ohm. Frequency Response: 45-200Hz. The 300W RMS/900W max power rating is a match for the KTA-30MW Mono Tough Power Pack Amplifiers.
  • ALPINE KTA-30MW 600 Watt Mono Amplifier Class-D Amp For Polaris RZR/ATV/UTV/Cart. Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.). Weather resistant (IP66 rating). CTA-2006-B Specifications: 300W RMS x 1 (2?/4?, 14.4V, ? 1% THD+N). 600W x 1 Peak (2?/4?, 14.4V, ? 1% THD+N)
  • 83dB S/N (ref. 1W into 4?). ?0.1% THD+N. OEM-grade Tyco 26-pin connector with pigtail wire harness. Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V). Sound control. Crossovers: Variable Low Pass filter 50-400Hz @ -24dB/Oct.. Input gain settings (variable)

Hope this list of the best alpine subwoofer for jeep will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.