{Updated} Top 10 Best smd rework stations {Guide & Reviews}

Are you looking for best smd rework stations, we’ve consulted top experts who has in-and-out knowledge about the smd rework stations. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best smd rework stations.

This list is undoubtedly the best smd rework stations available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good smd rework stations, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a smd rework stations.


Best smd rework stations – The Winners!


But these three has some more competitions too, Check out below List of Top 10 best smd rework stations.

If you are ready to choose a new smd rework stations, check out our recommendations for the best smd rework stations. But if you’d like to learn more about the various types of smd rework stations available and how to choose the right one for you, read on.


List of Top 10 Best smd rework stations In Detailed


Bestseller No. 1
CO-Z 858D Rework Station, 110V SMD Soldering Rework Station with Hot Air Heat Gun Set, LED Digital Temperature Display Screen Electric Desoldering Welding Iron Kit for Electronics Repairing
  • RAPID HEATING: The 110V hot air gun heats up to 842°F in 5 seconds and maintains an even temperature via PID technology. This highly efficient heat gun blows at 120L/min while built-in fuse protection guarantees 100% safe operation.
  • WIDE APPLICATION: Designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA, and other temperature-sensitive components. An essential tool for cell phone repair, laptop repair, or circuit boards soldering, this soldering tool can also be used for heat shrinking.
  • PRECISE TEMPERATURE CONTROL: Easily adjust the temperature from 212°F to 842°F with the up/down buttons and convenient LED display. 8 complimentary tips accommodate different needs and extend the service life of the soldering pencil.
  • AUTOMATIC TEMP CHANGE: The air gun automatically heats or cools when you remove/insert it into the holster. The ergonomic handle guarantees a comfortable grip, while 3 complementary nozzles (5/8/10mm) accommodate various rework needs.
  • ENHANCED TEMPERATURE STABILITY: A high-performance microcomputer and PID technology provide quick-warming capabilities with improved temperature stability.
Bestseller No. 2
500 ℃ Rework Station, Hot Air Desoldering-gun (100-500 ℃) Kit with Digital Display SMD Station for BGA IC, Temperature & Air Speed Adjustable,3 Air Nozzles IC Puller Desoldering Pump Anti-static
  • Desoldering Temp (MAX):500℃, Noises :<45db,Temperature change range:100--500℃.It adopts a long-life ceramic heater and uses microcomputer control so it can be heated up quickly and accurately, can up to the set temperature within 5-10 seconds.
  • Better quality hot air gun: The handle housing is made of flame retardant material with high flame resistance, and a built-in temperature protector which helps to automatically cut off power when overheating occurs or the fans stop running due to the damage. safer! (offer heat gun replacement for logistic damaged)
  • Auto Magnetic Induction: when the handle replaces on the bracket or <100°C, the heat gun would enter stand-by mode to stop heating. And it has a (temperature memory function), when you turn it on again, it will heat up to the set temp, convenient to use.
  • Super-Function: Anti - static type material box + delta ground wire, Digital LED display to show real-time temp, Use the low noise brushless fan to dissipate heat. safer for the user. it has (Temperature calibration function). Comes with three kinds of nozzles(big 8mm, medium 5mm, and small 3mm) replacement part. the heatgun can be easily replaced.
  • Air Flow Adjustable: airflow range (F1- - F8) is adjustable and air output is stable, moderate volume, no excessive noise.
Bestseller No. 3
Rework Station Digital Hot Air Anti-static Desoldering-Gun Station with Air Speed Adjustable (100-500℃),3 Air Nozzles, IC Puller, Desoldering Pump NEWACALOX 700W
  • Safer hot air gun made by upgrading the ceramic heating-core, handle housing is made of flame-retardant material. The heat gun handle will enter the overheat protection and automatically cut off the power to prevent the handle temperature from being too high.
  • Temp (MAX):500℃,(Temperature Range: 100 ℃ to 500 ℃)Noises :<45db, Temperature range:±1℃ it has temperature memory function( if turn off the station at 400 ℃, it will auto heat up to the 400℃ when turning on again). It is very convenient and simple to use, reducing trouble and improving work efficiency.
  • Air Flow Adjustable: big LED digital displays to show precision temperature for a hot air gun, airflow (F1- - F8) is adjustable and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. Air output is stable for different work, moderate volume, no excessive noise.
  • Air-Gun Automatic Sleep Function: The air gun automatic function is a safety measure that ensures the heat is automatically cut off when the air gun is in its holder. When you pick up again, the temperature rapidly rises, and it can reach the set temperature only within 3-5 seconds.
  • NEWACALOX 858D desoldering station has a fuse and using an insulated triangular plug. The handle placement rack can be installed according to personal usage habits. It's good for safely remove BGA-IC, keep pins intact, Much more safe and reliable, Blowing PCB will not make it blister. Package Included - 1x 858D Soldering Station Unit 1x Hot Air Gun 3x Air Nozzles 1x Solder Sucker 1x Mini Screwdriver 2x Tweezers 1x Knife 1x IC Extractor 1x Manual
Bestseller No. 4
Hot Air SMD Rework Station 100-500 °C Heat Gun Temperature & Air Speed Adjustable LED Screen Display with 3 Air Nozzles IC Puller Desoldering Pump Anti-static Tweezers Cutter
  • Professional Hot Air Gun - Soft air design is specific for hot-sensitive SMD work or reflow soldering, the surrounding plastic parts will not be deformed. Inner overheat protector to avoid high temperatures damaging the SMD components and hot air gun. 8 speed of adjustable airflow and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. Durable brushless motor and turbofan combination, working noise are less than 45dB, let you focus on your jobs.
  • Powerful Features - 1. Fast Heating: PID technology maintains a rapid heat rising, quickly heat up to the set temperature within 3-5 seconds(max temp. 500℃). 2. Intelligent temperature memory: Back to work, turn the hot air station on, you can pick up the hot air gun and work directly without the need of choosing the appropriate working temperature again. 3. Automatic Cooling Down: The heat gun can automatically turn on or off when you lift it from or on the cradle. And put the heat gun nozzles
  • Digital LED Screen - Large LED digital screen displays every work state of the hot air rework station, Current Temperature, Standby and No handle insert(no detected heat core).
  • Specification - Operating Voltage: AC110V, Output Power:700W, Noise: Less than 45dB, Temperature Range: 100 ℃ to 500 ℃, Handle Length: 120cm. Great for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA, and cell phone repair, laptop computer repair, circuit board components repairing, etc.
  • Package Included(12in1) - 1x 858D Soldering Station Unit 1x Hot Air Gun 3x Air Nozzles 1x Solder Sucker 1x Mini Screwdriver 2x Tweezers 1x Knife 1x IC Extractor 1x Manual. We offer a 1-year warranty and if you are not satisfied with our rework soldering station, please feel free to contact us. Order yours now, make your soldering easier and professional.
Bestseller No. 5
TXINLEI 8586 110V Solder Station, 2 in 1 Digital Display SMD Hot Air Rework Station and Soldering Iron, 12pcs Different Soldering Tips,Solder Wire,Tweezers,Desoldering Pump,700W 480℃
  • 【Rework & Soldering】 2 in 1 SMD Hot Air Rework Station and Soldering Iron.
  • 【Digital LED Display】 The product adopt microcomputer control,The hot air is digital LED display the temperature.
  • 【Solder Station Features】 High power,quick warming-up,Temperature stabilization and is impervious to air,,and long life and low noise. it have inductance in the hadle,it will be quickly to work when you take the handle,when the handle is return to the shelf,the machine will automatic stopage.
  • 【Widely Used】 Designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA and other temperature sensitive components, essential tool for cell phone repair, laptop repair, or circuit boards soldering.
  • 【20-in-1 Full Kit】 The packing include: 1 * 8586 Solder station, 12 * Solder iron tips, 1 * 6in1 BGA tools, 1 * Desoldering pump, 1 * 100g solder wire, 2 * Tweezers, 1 * Soldering iron heater, 1 * Hot air gun heater, 1 * IC puller.
Bestseller No. 6
CO-Z 2 in 1 SMD Soldering Iron & Hot Air Rework Station with LED Display, 898D Soldering Kit with Heat Gun, Digital Electronic Repair Tool with 11pcs Soldering Tips
  • Two-in-one ----- Attention: The voltage of this product is 110V. Rework station and soldering station combine in one, and you can separately control SMD rework and soldering. This machine will save you space, money and keep your work desk well-organized.
  • Precise Temperature Control ----- You can easily adjust temperature with the up and down buttons while the LED screen shows the current temperature for your convenience, 8 complementary tips to accommodate different needs and extends the service life of the soldering pencil. Note: when the soldering pencil is placed on the stand over 10 minutes, the temperature will decrease automatically for safety concerns.
  • Wide Application ----- This rework soldering station is designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA, and other temperature sensitive components, an essential tool for cell phone repair, laptop repair, or circuit boards soldering. Truly a must-have for DIY lovers and weekend professionals.
  • Super Quick to Respond ----- With the PID technology for even temperature control, the hot air gun heats up to 450℃ in 5 seconds and the soldering iron heats up to 200℃ in 7 seconds and keeps its temperature, the hot air gun blows at 120L/min for your work efficiency, the built-in fuse protection guarantees 100% safety during operation.
  • Integral Pack ----- The package comes with 8 tips, 3 nozzles sponge, stand, wrench and extractor.
Bestseller No. 7
Aoyue 968A+ Professional SMD Digital Hot Air Rework Station with a Soldering Iron and Vacuum Pickup
  • HIGH PERFORMANCE - 550 Watts( highest in the maket) of heating power and has a long life metal heater for the Hot Air. Very Quick heat up and a built in air flow gauge. Large Volume air pump that has a maximum flow of 23L/min with adjustable air flow. There is a powerful 70 Watt soldering iron for fast responsive soldering. All this is controlled through the Atmega16A microcontroller. There is a built in smoke absorber on the soldering iron to remove fumes to keep you safe.
  • MULTI-TOOL CAPABILITY - SMD Reworking tool designed to remove and/or repair surface mounted devices such as SOIC, CHIP, QFP, BLCC, BGA, and so on. There are 50+ nozzles sizes available. 5 Nozzles are included (1124,1130,1196,1197, 1313). Also contains an assortment of 10 soldering iron tips. Also a powered vacuum pickup tool is included and can be used to pickup small IC's.
  • INTELLIGENT FUNCTIONS - It has several advanced features such as the auto nozzle cooling process after reworking, auto sleep function when placed in the hot air holder, Temperature scale selectable between Centigrade and Fahrenheit. Digital display of hot air set and actual temperature. Microprocessor controlled with self-testing hot air heating core system which warns user when aging or breakdown of the heating core occurs. Digital calibration of the soldering iron and hot air system.
  • VERSATILE SOLDERING IRON STAND - The configuratble stand can be setup with the spool holder on either side of the station and there is an optional sponge holder. The stand will fit any of the available irons.
  • WHAT YOU GET - 1 x Aoyue 968A+ Station with Hot Air and Soldering Iron, 1 x power cord , 5 x SMD Nozzles, 3 x Vacuum Pickup Cups, Vacuum Suction Pen, 1 x IC Popper 1, 1 x Spare Heating Element for the Soldering Iron, 1 x Spare Heating Element for the Hot Air , 10 x Soldering tips(1 installed in the iron) x 1 x TY-98 Brass Coil tip cleaner, 1 x User manual.
Bestseller No. 8
YIHUA 862BD+ SMD ESD Safe 2 in 1 Soldering Iron Hot Air Rework Station °F /°C with Multiple Functions
  • Zilog Dual Core Microcomputer Processor - This unit heats up quickly, works well. Features Three LED Display System. You can easily change the digital readouts back and forth "Centigrade to Fahrenheit" for the soldering iron and hot air temperatures with easy steps.
  • PID Temperature Control Technology - This unit features Temperature Control Technology which the program will cycle every 20 milliseconds to detect the actual temperature of the soldering iron's heating element, quickly correct it with a rapid return to the correct set temperature.
  • Exclusive Air Gun Manual/Automatic Mode - The air gun automatic function is a safety measure which ensures the heat is automatically cut off when the air gun is in its holder.
  • Air Flow Adjustable and Readable - Dual blue LED digital displays to show precision temperature for hot air gun & soldering iron and one blue digital display to show air flow (20 - 80).
  • 1 Year Warranty (USA Exclusive) & User-friendly Design Features - Celsius/Fahrenheit Programmable, Temperature Correction Feature: -50 °C to +50 °C, Soldering Iron Sleep Function, Hot Air Gun Manual /Automatic Function, Hot Air Gun Fail-Safe Protection.
Bestseller No. 9
YIHUA 853D 2A USB SMD Hot Air Rework Soldering Iron Station, DC Power Supply 0-15V 0-2A with 5V USB Charging Port and 35 Volt DC Voltage Test Meter
  • 1 = 3 – You now get three professionally integrated stations in one compact package. The 853D Series comes equipped with a soldering iron station, a hot air rework station, and a DC power supply (with voltmeter mode). All three stations can be used simultaneously or independently.
  • Specifications – You can set the soldering station from 392~896°F, the hot air rework station from 212~896°F with adjustable air volume (120L/Min Max.), the DC power supply from 0~2A / 0~15V in output mode or, measure 0~35V DC in test mode. We equipped the station with a 2A/5V USB port so you can test or work on devices while they're powered.
  • Precision – Both the soldering station and the hot air rework station comes with high precision PID temperature stabilization function to maintain them at the set temperature. This way, you can enjoy a more efficient and smoother soldering/rework experience.
  • Extended Lifespan – A series of assistive functions to help preserve your station in mint condition for longer. You'll not only save on electricity bills but also the cost to replace wearable parts. These functions include sleep mode, automatic shut-down, and more.
  • Choose YIHUA with Confidence - 1 Year Warranty - USA Exclusive. Our team is providing technical & customer assistance 24/7 right on Amazon. Questions and Suggestions are welcome. A kind reminder here: Spare parts are available in our store. This model operates on 110-127V with its USA plug.
SaleBestseller No. 10
MYPOUOS 2 IN 1 750W LED Digital Soldering Station Hot Air Gun Rework Station Electric Soldering Iron For Phone PCB IC SMD BGA Welding SET 110V (8588D SET1)
  • 【Product advantages】This machine is equipped with a heat gun and a soldering iron. With handle induction system, automatic cooling, automatic constant temperature. Dual control switches, the most scientific and fashionable two-in-one design, with high-quality ABS plastic shell, the machine is compact and durable.
  • 【ADJUSTABLE TEMPERATURE】has big screen dual blue LED display sets, accurate setting and control temperature at +1°C, temperature adjustment range from 100°C to 480°C (212°F - 896°F), temperature tolerance is within +2°C.
  • 【Anti-static Design】Anti-static design of the whole machine, effectively eliminate the damage of SMD components. it has also the function of fault self-detection and fault warning.
  • 【Precautions 1】This product is 110V 60Hz,Before using, Please make sure your address is using 110-120V voltage ,please make sure that the power cord is tightly connected to the machine. Before turning on the power, make sure that the handles of the welding pen and the hot air gun are placed on the tray, and then turn on the two switches on the front of the welding station.
  • 【CAUTIONS & WARNINGS】For your own safety, please read the manual carefully before using and strictly comply with the rules of "Precautions".

Hope this list of the best smd rework stations will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.