Are you looking for best active poe splitter hot deals, we’ve consulted top experts who has in-and-out knowledge about the active poe splitter hot deals. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best active poe splitter hot deals.
This list is undoubtedly the best active poe splitter hot deals available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good active poe splitter hot deals, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a active poe splitter hot deals.
Best active poe splitter hot deals – The Winners!
But these three has some more competitions too, Check out below List of Top 10 best active poe splitter hot deals.
If you are ready to choose a new active poe splitter hot deals, check out our recommendations for the best active poe splitter hot deals. But if you’d like to learn more about the various types of active poe splitter hot deals available and how to choose the right one for you, read on.
List of Top 10 Best active poe splitter hot deals In Detailed
Bestseller No. 1
TRENDnet Gigabit Power Over Ethernet Plus Injector, PoE+ (30W) Power Network Distances Up To 100M (328 ft.), Black, TPE-115GI (Pack of 1)
- GIGABIT PORTS: 1 x Gigabit Ethernet port and 1 x PoE plus Gigabit Ethernet port. Integrated power supply.
- NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Injectors, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only)
- MANUFACTURER PROTECTION: We stand by the quality of our products.The TPE-115GI Gigabit Power Over Ethernet Plus Injector is backed and supported with 3 years of TRENDnet Manufacturer Protection.
- RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers.
- PoE POWER SUPPLY: This gigabit PoE plus injector supplies a PoE device with PoE (15.4W) or PoE plus (30W) power.
- INSTALLATION FLEXIBILITY: This PoE plus injector has a wall-mountable design that accommodates most installations scenarios.
- GIGABIT SPEEDS: Full Duplex 2Gbps Ethernet speeds with this PoE plus injector.
- PoE DISTANCE: This Gigabit PoE Injector provides a PoE plus network connection up to 100 meters (328 ft.)
Bestseller No. 2
REVODATA Gigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5x2.1mm DC PlugPS5712TG
- Support international standard IEEE802.3 af & IEEE802.3at(30W); POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af/at.
- PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module
- Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection
- 12V 2A power output, easy to access Poe network for non-PoE terminal
- 1500V high voltage isolation.
Bestseller No. 3
IPCamPower POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable, Works on all POE Switches, POE NVR and POE Cameras, Mode A and B POE Compatible
- Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender "Combiner" unit and a receiver "Splitter" unit. Plug Combiner unit into 2 open ports on your POE switch or POE NVR. Run one long cable to the location that has the cameras that are nearby each other and plug it into the Splitter. Connect 2 short cables to the Splitter unit and connect the other ends to your camera. Done!
- Reduces cabling costs. Let's say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch or NVR, you can now just run 1. Works great for both new and existing installs. Easy and Cost Effective.
- Ever installed a camera in a location, only to find out a few days later that you need another camera right by it? What's worse, the switch is on the other side of the building and it took you hours to run that one long cable run. No worries! Just use this splitter set to make your installation much easier and avoid running another long cable.
- The Splitter Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements. Full IP68 Rating gives this unit the ultimate weather protection and can directly be exposed to rain, sleet, snow, ice, and the sun.
- Simple plug n play installation. Works with all standard 802.3af/at POE switches and POE NVRs that use standard active POE. Works on most all brands POE Switches, Cameras and POE NVRs. Don't be fooled by other cheaper combiners on the market that only work on POE Switches. IPCamPower's Combiner works on all POE Switches, POE NVRs and POE IP Cameras and supports both Mode A and B POE making it the most flexible and compatible POE Combiner/Splitter on the market.
SaleBestseller No. 4
TP-LINK 802.3af Gigabit PoE Injector | Convert Non-PoE to PoE Adapter | Auto Detects the Required Power, up to 15.4W | Plug & Play | Distance Up to 100 meters (328 ft.) | Black (TL-PoE150S)
- Convert Non-PoE to PoE-With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of TL-PoE150S
- High Speed Gigabit Ports-Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port plus 1× Gigabit Ethernet Output port
- 802.3af PoE Compliant -TL-PoE150S supplies power and data via one single ethernet cable to 802.3af PoE devices and expands network to areas with no power lines or outlets
- Plug and Play Installation-Easy setup with no software installation or configuration needed
- Long Range Transmission-Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas
- Auto Detect Power-With Auto Detect technology, TL-PoE150S determines and delivers the exact power supply to your devices wiith up to 15.4W power output. Gigabit speed support
Bestseller No. 5
Ethernet Splitter, Waterproof PoE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Network Cable
- 【Run 2 IP Cameras on 1 Cable】: Allows you to run 1 cable run to the switch for 2 cameras that are near each other. Set consists of a "sender" unit and a "receiver" unit. Plug Sender unit into 2 open ports on your POE switch. Run one cable to the location that has the cameras that are nearby each other. Connect 2 short cables to the Receiver unit and connect the other ends to your camera.
- 【Reduces Cabling Costs】: Lets say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch, you can now just run 1. Easy and Cost Effective.
- 【Convenient for Adding Camera】: Ever installed a camera in a location, only to find out that you need another one right by it? Whats worse, the switch is on the other side of the building and it took you hours to run that one cable run. No worries! Just use this splitter set to make your installation much easier as all you need to do now is run 1 cable from the old camera to the new camera.
- 【Outdoor Waterproof】: The Receiver Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements.
- 【Easy to Use】：Simple plug & play installation. Only works on standard POE network switches.
Bestseller No. 6
Bawofu Active PoE Power Over Ethernet Splitter Adapter 48V to 12V, 5.5x2.1mm DC, IEEE 802.3AF/at Compliant 10/100Mbps PoE Splitter with 12V Output for Surveillance Camera CCTV & VoIP Phone, 2 Pack
- Adaptive 10/100Mbps network data transmission: This poe splitter compatible with IEEE802.3-AF/AT transport protocol uses six types of all-copper cables for real-time data transmission without jamming
- Input Power Voltage: Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance DC44-57V from poe switch or poe injector, deliver power up to about 100m (328 feet).The maximum power consumption is 15.4W, and the POE input voltage range is 48V-57V. 5.5x2.1mm DC Plug Cable. DC Jack(Male) output DC voltage is 12V and the maximum output DC current is 1.2A
- Plug-and-Play - Require no configuration: A simple solution to expand your network to where you wish to place network devices but has no power outlet, powerline ethernet adapter
- Easy to install and operate: Any device which connects to a network via an ethernet cable,needs only one cable connection to power and operate if you use PoE.POE makes installation simpler and less expensive, helps to scaling up networks and adding new connections and devices. POE splitter can make non-POE device works via POE.Say goodbye to the wiring annoyance of multiple lines by simply connecting one network cable to transmit data and power at the same time
- Typical application areas include malls, hospitals, companies, parking lots, urban streets, residential buildings, etc. M2C mode sales, the powerful production capacity of background factories, while ensuring capacity and quality, directly give the buyer (consumers), so that the buyer can buy high performance-price ratio products, so that the buyer can buy with confidence
Bestseller No. 7
DSLRKIT DC 5V 2.4A Active PoE Splitter Power Over Ethernet 802.3af 5.5x2.1mm
- 5.5x2.1mm DC Plug Active PoE Splitter，48V to 5V 2.4A (Max. 12watt)
- 10/100Mbps Ethernet，Compliant with IEEE802.3af，With 2.5KV isolation
- This POE Splitter is suitable for household IP camera with DC 5V power (as the kind in the photo of the instruction),it does not suit equipments with DC 12V power
- Some managed intelligent Gigabit PoE switches need to set the LAN port of this connected splitter to Manual 100Mb/s mode in the management Settings of switches, otherwise the power supply may work normally but the network connection will not work, such as the following switch, HP 3500-48G-PoE yl Switch (J8693A)
- Please note that Philips changed the size of the DC socket on the Bridge. If you have a v1 Bridge the DC socket is 5.5×2.1mm. If you have a v2 Bridge the DC socket is 5.5×2.5mm, this splitter is not compatible.
Bestseller No. 8
TP-Link TL-PoE160S | 802.3at/af Gigabit PoE Injector | Non-PoE to PoE Adapter | Supplies PoE (15.4W) or PoE+ (30W) | Plug & Play | Desktop/Wall-Mount | Distance Up to 328 ft. | UL Certified, Black
- 【Convert Non-PoE to PoE】With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of TL-PoE160S
- 【Gigabit Ports Ensures High Speed】Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port + 1× Gigabit Ethernet Output port
- 【802.3at/af PoE Compliant 】TL-PoE160S supplies power and data via one single ethernet cable to 802.3at/af PoE devices and expands network to areas with no power lines or outlets
- 【Plug and Play】Easy setup with no software installation or configuration needed
- 【Long Range Transmission】Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas
- 【Auto Detect】With Auto Detect technology, TL-PoE160S delivers up to 30W to a PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices.
SaleBestseller No. 9
TP-Link TL-PoE10R, 802.3af Compliant Gigabit PoE Splitter, 5/9/12V DC Power Output, Up To 100 Meters (325ft.), Power Adapter & Cable Included
- IEEE 802. 3af compliant
- Deliver power up to about 328. 1 feet(100 meters)
- Gigabit Ethernet ports
- 5/9/12V DC power output
- Plug-and-Play - Require no configuration
- Industry-leading 2-year and unlimited technical support.
Bestseller No. 10
CENTROPOWER 5 Port Outdoor POE Switch/Extender/Booster, 60W 48V 10/100/1000M POE Passthrough Switch Outdoor Ethernet Extender，PoE Repeater
- RJ45 port supports 10/100/1000 Ethernet connections and Comply with IEEE 802.3at/af Power over.
- Supports passive PoE to power the switch.We recommend supplying power with 60W PoE adapters(not included).（If your POE switch has low output power, you will need a POE injector to power the extender. Otherwise it will not work properly）.
- POE extender:No additional power supply is required plug-and-play simple set up,Extends the range of PoE and Ethernet an additional 100 meters.
- Note: You need to use the POE switch output to match this extender, otherwise the extender output will not work.
- Automatically detects and protects PoE equipments from being damaged by incorrect installation.
- Compact size, Pole Mountable and Weather-proof Case.Please note that there is no power supply.
Hope this list of the best active poe splitter hot deals will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.