Are you looking for best apevia micro atx cases, we’ve consulted top experts who has in-and-out knowledge about the apevia micro atx cases. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best apevia micro atx cases.
This list is undoubtedly the best apevia micro atx cases available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good apevia micro atx cases, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a apevia micro atx cases.
Best apevia micro atx cases – The Winners!
List of Top 10 Best apevia micro atx cases In Detailed
SaleBestseller No. 1
Apevia SPIRIT600W Spirit 600W ATX Power Supply with Auto-Thermally Controlled 120mm Fan, 115/230V Switch, All Protections
- Apevia 600W Spirit ATX Gaming Power Supply with black sandblasted casing. Supports Dual/Quad/Multi-core CPUs. Supports single 12V output for higher power usage.
- Connectors : 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral
- Auto-thermally controlled 120mm black fan. Output: +3.3V@16A, +5V@20A, +12V@45A, -12V@0.5A, +5VSB@2.5A
- Heavy-duty protections: Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections
- The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on.
- The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector.
- The 8pin PCI-E GPU connector can be split apart to become a 6+2 connector by pushing one end of the 6pin down and the other end of the 2pin up for graphics cards that require a 6pin power connector.
- The 24pin motherboard connector can be split apart to become a 20+4 connector by pushing one end of the 20pin down and the other end of the 4pin up for motherboards that require a 20pin power connector
SaleBestseller No. 2
Apevia SFX-AP500W Mini ITX Solution/Micro ATX/SFX 500W Power Supply
- APEVIA SFX-AP500W / Micro ATX / SFX 500W Power Supply
- Connectors: 1 x 20+4pin Main Power, 1 x 8pin 12V(P4+4), 1 x 6/8pin PCIe, 3 x SATA, 2 x 4pin Molex, 1 x 4pin Floppy
- Dimension: 125mm x 100mm x 63.5mm (4.9" x 3.94" x 2.5") - L x W x H
- The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on.
- The 8pin CPU connector can be split apart to become a 4+4 by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power.
- The 8pin PCI-E GPU connector can be split apart to become a 6+2 by pushing one end of the 6pin down and the other end of the 2pin up for graphics cards that require a 6pin power.
- The 24pin motherboard connector can be split apart to become a 20+4 by pushing one end of the 20pin down and the other end of the 4pin up for motherboards that require a 20pin power.
SaleBestseller No. 3
APEVIA VN500W Venus ATX Power Supply with Auto-Thermally Controlled 120mm Fan, 115/230V Switch, All Protections
- Apevia Venus 500W ATX Power Supply
- Connectors:1 x 20/24pin Main Power, 1 x 8pin 12V, 3 x SATA, 3 x Peripheral, 1x PCI-E(6+2)
- Auto-Thermally Controlled Black 120mm Fan. 115/230V Switch. 5% Tolerance of 5V, 3.3V & 12V Output
- Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections
- The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on.
- The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector.
- The 8pin PCI-E GPU connector can be split apart to become a 6+2 connector by pushing one end of the 6pin down and the other end of the 2pin up for graphics cards that require a 6pin power connector.
- The 24pin motherboard connector can be split apart to become a 20+4 connector by pushing one end of the 20pin down and the other end of the 4pin up for motherboards that require a 20pin power connector
SaleBestseller No. 4
Apevia ATX-SP700 Spirit ATX Power Supply with Auto-Thermally Controlled 120mm Fan, 115/230V Switch, All Protections
- Apevia 700W Spirit ATX Gaming Power Supply with black sandblasted casing
- Supports Dual/Quad/Multi-core CPUs. Supports single 12V output for higher power usage.
- Connectors: 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral
- Auto-thermally controlled 120mm black fan. Output: +3.3V@16A, +5V@20A, +12V@53A, -12V@0.5A, +5VSB@2.5A
- Heavy-duty protections: Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections
- IMPORTANT: The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on.
- IMPORTANT: The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector.
- IMPORTANT: The 8pin PCI-E GPU connector can be split apart to become a 6+2 connector by pushing one end of the 6pin down and the other end of the 2pin up for graphics cards that require a 6pin power connector.
Bestseller No. 5
Apevia Prism-BK Prism Micro-ATX Gaming PC Cube Case w/ 5X 120mm ARGB Fans, 366 RGB Modes, Dual Tempered Glass Panels, 240mm Radiator Support, 1X USB3.0, 2X USB 2.0, HD Audio Port, Black
- Performance gaming cube style micro-ATX with dual tempered glass panel for eye-catching visibility of your gaming setup. Plenty of room on the back side to hide and route cables. Matching paint colors from both the exterior/interior of the case. Ventilated metal side panel for increased air circulation
- 5x 120mm ARGB fans pre-installed in case, comes with 3pin ARGB connector on RGB fans for ARGB motherboard sync (Only compatible with ARGB motherboards). RGB fans has 366 RGB lighting modes via RGB light switch button on top of case (Press down on LED button for 5 seconds to switch to motherboard ARGB sync mode).
- Can fit graphics cards up to 340mm in length and CPU coolers up to 155mm in height. Top panel comes with 1 x USB 3.0, 2 x USB 2.0, Power button, LED switch button, HDD / Power LED indicators, & HD Audio jacks. Water cooling options: 240mm
- Screw in PCI-E Covers (Non-punch out PCI-E Slots) for hassle free GPU installation. Room for up to 2 x 3.5" hard drives or 1x 3.5" hard drive + 1x 2.5" hard drive
- Magnetic Dust Filters on the top panel for reducing dust accumulation into case. Easy to remove dust filter to wash/clean
Bestseller No. 6
Apevia ATX-PM650W Premier 650W 80+ Gold Certified Active PFC ATX Semi-Modular Gaming Power Supply with 366 RGB Light Modes
- 650W 80+ Gold Certified Active PFC ATX Gaming Semi-Modular Power Supply.
- Semi Modular Design Supports Cable Management. Connectors: 1 x 20/24pin Main Power, 2 x P8(4+4P) ESP 12V, 4 x SATA + 4 x 8(6+2)pin PCI-E, 4 x Peripheral, 1 x Floppy. Single 12V Output for Higher Power Usage
- Auto-Thermally Controlled 135mm RGB Fan with 366 RGB Light Modes. Output: +3.3V@20A, +5V@20A, +12V@83.3A, -12V@0.3A, +5Vsb@3A
- Heavy Duty Protections: Short-Circuit/ Over-Voltage/ Over-Power/ Under-Voltage Protections. Double Forward Converter Design.
- Supports ATX 12V 2.3 Version. Supports Dual/Quad Core CPUs. Supports SLI/Crossfire/ Haswell. Large Japanese Capacitor.
- IMPORTANT: The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on.
- IMPORTANT: The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector.
- IMPORTANT: The 8pin PCI-E GPU connector can be split apart to become a 6+2 connector by pushing one end of the 6pin down and the other end of the 2pin up for graphics cards that require a 6pin power connector.
Bestseller No. 7
Apevia ATX-ES600W Essence 600W ATX Semi-Modular Gaming Power Supply with Auto-Thermally Controlled 120mm Black Fan, 115/230V Switch, All Protections
- Apevia 600W Essence ATX Semi-Modular Gaming Power Supply with black sandblasted casing
- Supports Dual/Quad/Multi-core CPUs. Supports single 12V output for higher power usage.
- Connectors : 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral
- Auto-thermally controlled 120mm black fan. Output: +3.3V@16A, +5V@20A, +12V@45A, -12V@0.5A, +5VSB@2.5A
- Heavy-duty protections: Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections
- IMPORTANT: The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on.
- IMPORTANT: The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector.
- IMPORTANT: The 8pin PCI-E GPU connector can be split apart to become a 6+2 connector by pushing one end of the 6pin down and the other end of the 2pin up for graphics cards that require a 6pin power connector.
Bestseller No. 8
Apevia ATX-ES600-WH Essence 600W ATX Semi-Modular Gaming Power Supply with Auto-Thermally Controlled 120mm Black Fan, 115/230V Switch, All Protections, White Casing
- Apevia 600W Essence ATX Semi-Modular Gaming Power Supply with white sandblasted casing
- Supports Dual/Quad/Multi-core CPUs. Supports single 12V output for higher power usage.
- Connectors : 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral
- Auto-thermally controlled 120mm black fan. Output: +3.3V@16A, +5V@20A, +12V@45A, -12V@0.5A, +5VSB@2.5A
- Heavy-duty protections: Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections
SaleBestseller No. 9
APEVIA SFX-AP400W Mini ITX Solution / Micro ATX / SFX 400W Power Supply
- APEVIA SFX-AP400W Mini ITX Solution / Micro ATX / SFX 400W Power Supply
Bestseller No. 10
Apevia Inspire-PK Inspire Mid Tower ATX Gaming PC Case w/ 4X 120mm ARGB Fans, 366 RGB Light Modes, 1x Metal Mesh Airflow Front Panel, 1x Door Swivel Style Magnetic Glass Side Panel, 2X USB3.0, Pink
- Performance gaming mid tower with left-side tempered glass door swivel open style magnetic side panel & metal mesh high airflow front panel with 134 total vents on the sides. Plenty of room on the back side to hide and route cables. Matching paint colors from both the exterior/interior of the case & case fans.
- 4x 120mm ARGB fans pre-installed in case, comes with 3pin ARGB connector on RGB fans for ARGB motherboard sync (Only compatible with ARGB motherboards). RGB fans has 366 RGB lighting modes via RGB light switch button on top of case (Press down on LED button for 5 seconds to switch to motherboard ARGB sync mode)
- Can fit graphics cards up to 360mm in length and CPU coolers up to 165mm in height. Top panel comes with 2 x USB 3.0 & HD Audio jacks. Front panel water cooling options: 120mm, 240mm, 280mm, 360mm / Rear panel water cooling options: 120mm
- Screw in PCI-E Slots (Non-punch out PCI-E Slots) for hassle free GPU installation. Room for up to 2 x 2.5" hard drives and 2 x 3.5" hard drives
- Magnetic Dust Filter on the top panel for reducing dust falling into case. Easy to remove dust filter to wash/clean