Are you looking for best pcie raid controller, we’ve consulted top experts who has in-and-out knowledge about the pcie raid controller. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best pcie raid controller.
This list is undoubtedly the best pcie raid controller available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good pcie raid controller, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a pcie raid controller.
Best pcie raid controller – The Winners!
But these three has some more competitions too, Check out below List of Top 10 best pcie raid controller.
If you are ready to choose a new pcie raid controller, check out our recommendations for the best pcie raid controller. But if you’d like to learn more about the various types of pcie raid controller available and how to choose the right one for you, read on.
List of Top 10 Best pcie raid controller In Detailed
- Screws & screwdriver Included.
- SSD Bus interface: NVMe (not compatible with SATA M.2 SSD).
- SSD form factor: M.2 M-Key (Not compatible with B-Key SSD).
- PCI Express Physical interface: PCIe x16/x8/x4 slot. Logical Interface / PCIe Lanes: X4.
- Compatible Sizes: 2230 / 2242 / 2260 / 2280. NOTE: It will not fit the PCIe x1 slot.
- Comprehensive compatibility: The ACTIMED PCI-E to 4 SATA port expansion card supports PCIE 3.0 slots and is backward compatible with PCIE 2.0 slots. With SATA 3.0 interface and backward compatible with SATA 2.0 / 1.0 interface.
- Security and stability: Marvell 88SE9215 chipset to improve the stability and security of PCIE SATA cards. A heatsink is included for good temperature control to prevent damage caused by high temperatures.
- Plug and Play: Easy installation, plug and play, hot-swappable support. the fastest speed of PCI-E 3.0 slot is 500-550 M/S. the fastest speed of PCI-E 2.0 slot is 380-450 M/S. when connected to PCI-E 1.0 slot, the speed is only 200-300 M/S. (Please check with your motherboard manufacturer for supported PCI-E versions).
- Compatible slots and systems: SATA controller PCI-E X1 interface compatible with 1X/4X/8X/16 slots (transfer speeds up to SATA III 6 Gbit/s). Supports Windows 7/8/10/XP/2003/2008/Linux.
- Includes all required accessories: a 4-port SATA expansion card, a SATA 15 PIN 1 to 4 power cable, 4 SATA data cables, a low profile bracket, screwdriver and screws, installation CD. Give you a convenient and fast shopping experience.
- Intel vroc ready and nvme raid support on amd ryzen threadripper
- New two phase power solution with upto 14w output
- Supports four additional nvme m.2 drives using intel vroc for transfer speeds upto 128gbps
- Pci express 3.0 x16 interface, compatible with pci express x8 and x16 slots
- Stylish heatsink and integrated blower style fan prevent M.2 throttling
- [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s
- [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported
- [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE
- [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot
- [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card
- You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.
- 4 Ports Adapter Card --- You could add 4 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
- Chipset --- With using The Asmedia1064 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported.
- For All PCs --- with a low profile Bracket and 4 SATA Cable,compatible with 99% size chassis on the market.Compatibility issues may occur due to the different motherboard environments in which it is installed.
- System Support --- Connect 4 large capacity storage devices at the same time. Compatible with Windows XP /2003 / 7 / 8 / 10 / MAC / NAS / Linux OS.Any question please connect us: Ziyituod@evisionde.com
- Adapted server-grade PCB supports up to four PCIe 5.0/4.0 M.2 drives, with up to 512 Gbps bandwidth for smooth data transfers
- 1 x 6-pin PCIe Power connector and Two-phase power solution up to 14-watt output support the latest NVMe drives
- Large heatsink, top and bottom thermal pad, and active fan reduces M.2 SSD temperatures for unthrottled transfer speeds and enhanced reliability, extra fan cable support fan control from MB chassis fan header
- Support Raid functions across different platforms to create a bootable RAID array with up to four M.2 SSDs.
- RIITOP M.2 NVMe to PCIe Adapter Allows adding NVMe SSD Hard Drive to your PC Desktop at perfect performance
- Compatible with M.2 SSDs (PCI-e NVMe): 80x22mm, 60x22mm and 42x22mm. Hardware Requirement: Available PCI-e 4.0/3.0/2.0/1.0 x4/x8/x16 Slot on Mainboard
- Designed with Heat Sink up-cover, it will strengthen the effect of heat dissipation to protect your NVMe SSD well!
- Please NOTE: 1. This M.2 PCIe adapter can Only Support M.2 PCI-e Based M Key Nvme SSD, DO NOT support PCI-e M Key AHCI SSD, SATA based B+M key or B Key SSD. 2. Please download driver of SSD from the brand official website if "Disk Management" or "Device Management" can not show the SSD. 3. Old MB can not support Booting from "NVMe", Please confirm the MB's specification
- Package including: 1x M2 NVMe PCIe Adapter with Heatsink, 3x Silicone Thermal pad, 1x Screwdriver, Spare Screws, 1x User Manual
- 【SATA expansion card 2 ports】This PCIE SATA card has two SATA 3.0 ports with 6Gbps transfer speed, suitable for both large/small PC cases, compatible with Windows 11 /10 /8 /7 /Vista /MAC / NAS / Linux OS etc, for PCI Express X1 X4 X8 X16. Note: Only MBR boot is supported, UEFI boot is not supported.
- 【Excellent heat dissipation】The PCIE SATA expansion card built-in alloy material heatsink with large area to effectively dissipate excess heat, so that the two SATA ports are always at room temperature and work more stably.
- 【High Efficiency Performance】Supports AHCI mode and NCQ capabilities, this sata expansion card allowing you to increase the overall performance of your hard disk by 5-20%. Supports hot-swapping and IDE mode (programming interface)
- 【Durable and Stable】15U gold-plated conductor improves conductivity and reduces wear and tear, ensuring faster and more stable transmission. Thick PCB board resists high and low temperatures and will not deform after prolonged use.
- 【Support System】 Compatible with Windows 7/8 (32/64 bit), Vista/11/10/MAC/linux. Does not support XP/Server 2003. Equipped with a replaceable bezel to support 4U/2U chassis. Windows(R) XP/Server2003Note: Please make sure the product is compatible with your computer before purchasing. For products with SATA interface, WIN10/11 does not need to install the system, and if you use WIN7, WIN8 and blue screen happens, you need to reinstall the system
- It connects six 6 Gbps SATA3.0 SSD or HDD to your desktop computer with 6 SATA cable to improve your system performance and expand overall internal storage. (NO-Support Raid).
- The 6 ports SATA controller base on ASMedia ASM1166 chip, more stable and wider compatible. Port Multiplier Command-based switching supported.
- Compliant with SATA3.0 standards, backward compatible with SATA1.0 and SATA2.0. Support PCIe1.0, 2.0, 3.0 protocol on motherbaord PCIe X4, X8, X16 slot.
- Full height and low profile bracket included.
- Supports Windows 7/8/10, Windows Server 2008 R2/2012 R2/2016/2019, RHEL/CentOS 6/7/8, Debian 9/10/11, Ubuntu 16/18/20/21, SUES 11/12/15, FreeBSD 11/12/13, VMware ESXi 5/6/7.
- ENHANCE YOUR PERFORMANCE: Connect a PCIe M.2 SSD (M-Key / NGFF / NVMe or AHCI) to your computer through PCI Express for ultra-fast data access and to boost your system’s performance
- BROAD COMPATIBILITY: This M2 PCIe SSD adapter is compatible with PCIe 3.0 motherboards, and backward compatible with PCIe 2.0 and PCIe 1.0. It also supports PCIe M.2 SSDs (NVMe and AHCI): 2242, 2260, 2280, and 22110 drives for ultimate compatibility
- HASSLE-FREE SETUP: With native OS support, this M 2 PCIe 3.0 x4 adapter is fast to install, ensuring an easy setup - Also compatible with PCIe x8 and x16 slots
- FULL AND LOW PROFILE: This SSD PCIe M.2 adapter is equipped with a full-profile bracket, and includes a half-height/low-profile bracket for installation in small form-factor computers.
- THE IT PRO'S CHOICE: IT professionals choice for over 30 years - This NVMe PCIe adapter card is backed for 2 years, including free 24/5 North America based multi-lingual assistance
Hope this list of the best pcie raid controller will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.