Are you looking for best seismic audio active pa speakers, we’ve consulted top experts who has in-and-out knowledge about the seismic audio active pa speakers. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best seismic audio active pa speakers.
This list is undoubtedly the best seismic audio active pa speakers available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good seismic audio active pa speakers, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a seismic audio active pa speakers.
Best seismic audio active pa speakers – The Winners!
List of Top 10 Best seismic audio active pa speakers In Detailed
Bestseller No. 1
Seismic Audio Speakers TRS ¼” Patch Cable, 25 Foot Balanced Cord, Black
- TRS Cable: Seismic Audio Speakers’ TRS cables are TRS to TRS ¼” patch cables with a heavy duty flexible rubber jacket.
- Patch Cable: These balanced ¼” cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers.
- Audio Cable: These shielded cables can be used anywhere a balanced ¼” connection is required. The wires are ¼” TRS male to ¼” TRS male.
- 25 Foot Audio Cable: The audio cable is 25 feet long and is made of 22g Oxygen-Free Copper (OFC) conductors for an enhanced signal clarity and superior RF rejection.
- Black TRS Cable: These 25 foot audio cables are black in color. You won’t have to compromise on audio quality with Seismic Audio Speakers’ TRS ¼” Patch Cables.
Bestseller No. 2
Seismic Audio Speakers Passive Direct Box with Ground Left and Attenuator Switch DI Box, Pair of Passive Direct Boxes
- Passive Direct Box: This pair of DI boxes enables the connection of any unbalanced audio signal, for example an electric instrument or keyboard. It also works from an amp speaker output to any unbalanced input such as a mixer.
- Attenuator Switch Box: The parallel output allows simultaneous connection to two separate inputs, like an amplifier and mixer. The attenuator switches from 0db, -20db and -40 db.
- Direct Box: This direct box will translate high impedance instrument outputs into low impedance balanced signals. or balanced low impedance signals into unbalanced outputs.
- Sound Attenuators: The attenuator switch makes correct output signal levels for optimum level matching to connected equipment possible. The switchable ground lift eliminates ground loop hum problems.
- DI Box Uses: This DI Box will convert unbalanced +10db DJ mixer signals to a balanced line level signal, enabling interfacing with consoles more easily & longer cable runs. Great for clubs, churches, PA systems, monitor systems, karaoke or DJ systems.
Bestseller No. 3
Seismic Audio Speakers Single Wedge Style Floor Monitor, Stage Monitor Speaker, PA/DJ
- Model - SA-10MSingle | Passive 10" Stage or Floor Monitor | Requires external amplifier
- Wedge Style Monitor Speaker: The floor monitor delivers sound through a 4” x 8” piezo horn tweeter with a frequency response of 45Hz to 20,000 Hz.
- Floor Monitor Speakers: The wedge style monitor speaker has 100 watts RMS with 200 watts peak power.
- Stage Monitor: The floor monitor speaker is a 2 way speaker with 40 oz magnet and a 2 inch voice coil. It is wired at 8 ohms and the stage monitor has dual ports.
- Wedge Style Floor Speaker: The wedge style floor speakers weigh 22 lbs and have 18 gauge full face steel grill.
Bestseller No. 4
Seismic Audio - Passive Direct Box w/ Ground Left and Attenuator Switch DI Box
- Model Number: SA-DI1 - Construction: Solid Steel - Dimensions: 4.75" x 3" x 1.75"
- Attenuator Switch: 0db, -20 db., -40db
- Instrument Input: 50K unbalanced TS jack - Parallel (Link) Out: 50K unbalanced TS jack
- Balanced Output: 600 ohm Balanced XLR Jack - Ground Left: Switchable Ground Lift
- Recommended Uses Included: Live Sound, Permanent Installations, Clubs, Church, Practice, and PA, Monitor, Karaoke, or DJ Systems
Bestseller No. 5
Seismic Audio - Tower1 - Powered Portable Column Array PA System - 4x3 Column Speaker & 10 Inch Subwoofer
- Model: Tower1 | Powered Portable Column Array PA System | 10 Inch Subwoofer with 4x3 Inch Column Array Speaker | Built-In Mixer and Bluetooth
- Active 10" Sub Cabinet | Class D Power Amplifier | Column Speaker houses four 3 inch Speakers | System Power 450W | Power Rating: (RMS/Peak) SUB:150W/300W: TOP:80W/160W | Wireless Connectivity: Bluetooth Technology Built in (Stereo Wireless)
- Frequency Response: 45Hz-19KHz | Max SPL (peak) 120dB | Connectors: 1 - Mic/Line, 1 - Mic/Line Jack(combo), 1 - 3.5mm Jack, 1 - RCA(input), 1 - RCA(AUX Out) | Satellites connectors: Multi-Pin connector | Controls Master Level, CH1-CH4 Level, Line/MIC, Master Level, Hi/Low EQ
- Features: MP3 Player | Bluetooth 4.0 Stereo | Effects Delay | Cooling Convection | Protection: Short Circuit, Over-Current, Limiter, Over temp, Soft start | Indicators: Power, Signal, Limiter
- Construction: Cabinet Material ABS | Powdered Coating | Dimensions: Subwoofer: 24" x 22.5" x 23.25" | Weight: 48.5 lbs | Designed for Easy Set Up and Tear Down
Bestseller No. 6
Seismic Audio - SALA-210-Pair - Pair of Passive 2x10 Line Array Speakers with Dual Compression Drivers - PA/DJ Band Live Sound
- MODEL: SALA-210 (Pair)
- CONTENTS: Pair of Premium Passive 2x10 Line Array Speakers
- CONDITION: New
- APPLICATION: Line Array Sound Reinforcement
- ACTIVE/PASSIVE: Passive
Bestseller No. 7
Seismic Audio - SA-MA8C - 8 Channel 400 Watt Powered PA Head Mixer with Bluetooth and Effects
- Model: SA-MA8C | 8 Channel Powered PA Head Mixer with Bluetooth
- Power Rating: 200 Watts RMS at 8 ohm | 400 Watts RMS at 4 ohm | Built-In Bluetooth | USD | SD | Reverb
- Controls: Volume, Bass, Treble & Effects on each Channel | Master Volume Controls | 5 Band EQ for Master Channel | CD/TAPE Volume Control
- Inputs: 8 -1/4 Inch TRS | 8 XLR | RCA L/R Input | Outputs: RCA L/R Output | 4 Ohm Dual 1/4 Inch Speaker Outputs
- Class AB Amplifier with Built-In Cooling Fan | Dimensions: 20.66" x 10.75" x 10" | Weight: 18.8 lbs
Bestseller No. 8
Seismic Audio FL-10MP-PW Premium Powered 2-Way 10-Inch Active Floor/Stage Monitor with Titanium Horn
- MODEL: FL-10MP-PW
- CONTENTS: Powered 2-Way 10" PA Monitor
- CONDITION: New
- APPLICATION: PA Floor Monitor/Live Sound/Stage/Studio
- ACTIVE/PASSIVE: Powered/Active
Bestseller No. 9
Seismic Audio - Pair of Dual 15" PA DJ SPEAKERS 1000 Watts PRO AUDIO - Band, Bar, Wedding, Church
- 500 Watts RMS; 1000 Watts Peak; Impedance: 4 Ohms
- Each Woofer has 50 oz magnet and 2" voice coil
- Two 2x5 Tweeter
- Frequency Response: 30Hz to 20kHz
- Steel Grill over each speaker
Bestseller No. 10
Seismic Audio - 18" Raw Subwoofers/Woofers/Speakers - PA DJ Pro Audio Replacement Sub - 750 Watts RMS - 240 oz Magnet - 8 Ohms - 4" Voice Coil
- Model #: New Madrid 18
- Type: 18" Woofer/Speaker. Power RMS: 750 Watts. Power Peak: 1500 Watts
- Frequency Response: 25-2K Hz. Sensitivity: 102 db. Magnet: 240 oz. Voice Coil: 4"
- Impedance: 8 Ohm. Die Cast Aluminum Chassis. Paper cone. Cloth Edge
- This woofer is brand new. One year warranty