Are you looking for best shockmount at2020, we’ve consulted top experts who has in-and-out knowledge about the shockmount at2020. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best shockmount at2020.
This list is undoubtedly the best shockmount at2020 available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good shockmount at2020, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a shockmount at2020.
Best shockmount at2020 – The Winners!
List of Top 10 Best shockmount at2020 In Detailed
Bestseller No. 1
BILIONE Upgraded Desktop Microphone Stand, Adjustable Mic Stand Desk with Pop Filter, Shock Mount, Microphone Clip, 5/8" to 3/8" Metal Screw Adapter
- [All-in-one comboo]Professional Recording Studio Equipment with adjustable desk microphone stand, Adjustable Shock Mount, double layer Pop Filter , Screw adapter, Microphone clip. All the items of the package can meet your need for live streaming, broadcast, audio recording and more.
- [Rock Solid]BILIONE Mic Stand Desktop made a new upgrade to Weighted Base and Metal Rod. The new version all-metal base weighs 1.5lbs, measures 5.1inches (13cm) in diameter, and has an anti-slip pads on the bottom to avoid noise when moving. We thickened the diameter of the metal rod to 0.74inches to easily support heavy microphones without falling over.
- [Two-Screen POP Filters]The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those scary "plosives" that follows "B" and "P".
- [Excellent Shock Mount Effect]Please noted the shock mount is not fit for Blue Yeti.It can protect your microphone all-around with high elasticity wrap roping desigh and reduce vibrations from traveling into the microphone. Suitable for mikes with a diameter of more than 1.77"/4.5cm, and Max diameter:2.05"/5.2cm.
- [Strong Compatibility and Applicability]Package includes 3/8" to 5/8" adapter, making it compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2035, HyperX QuadCast, QuadCast S, Razer Seiren X etc. Adjustable shock mount and universal mic clip also provide more possibilities.
Bestseller No. 2
RØDE NT1 5th Generation Large-diaphragm Studio Condenser Microphone with XLR and USB Outputs, Shock Mount and Pop Filter for Music Production, Vocal Recording and Podcasting (Black)
- Groundbreaking studio condenser microphone that fuses the classic sound signature of the iconic NT1 with patented next-generation technology
- Connect to an audio interface or mixer via XLR, or plug directly into a computer via USB to record studio-grade sound in any setup – an all-in-one digital recording solution for the home or the studio
- Offers the classic warm, silky character, extremely low self-noise and high SPL handling capability that the original is revered for, perfect for a huge range of applications, from voiceovers and guitars to drums and piano
- Features RØDE’s ultra-low-noise, high-gain Revolution Preamp and high-resolution (up to 192kHz) analog-to-digital conversion for crystal-clear digital recordings
- Body machined from high-grade aluminium with nickel plating and military-grade ceramic coating, ensuring its ready to take on the rigours of recording day in, day out
- English (Publication Language)
SaleBestseller No. 3
Samson MD5 Desktop Microphone Stand
- 5" Desktop microphone stand
- Designed to hold any standard microphone for desktop placement
- Weighted metal base for stability
- Country of Origin: China
- Samson Audio (Author)
- English (Publication Language)
Bestseller No. 4
AT2020 Shock Mount - Microphone Mounts Reduces Vibration Noise and Shockmount Improve Recording Quality for Audio Technica AT2020 AT2020USB+ AT2035 ATR2500 AT4040 Condenser Mic by YOUSHARES
- Shock mount fit diameter size: ( 45mm-50mm，1.8 inch-2 inch ) microphone, Such as: AT2020, AT2020USB, AT2020USB+, AT2035, AT4040, ATR2500x, AT4033, AT2050, CAD U37, RE20, MXL440, MXL 500, MXL 4000, MXL V67G, MXL550, Floureon BM700, Floureon BM800, Rode NT1
- Shock mount Diameter size: ( 45mm-50mm，1.8 inch-2 inch ) , Compatible with many condenser Microphone. Shock Mount isolates the microphone from noise, shock and vibrations. Like floor tapping, desk bumping, adjusting the boom, etc.
- Boom Arm Capability - With a 3/8"-5/8" screw adapter. Perfectly match the most of boom arm and microphone stands.
- Exquisite Design - The shock mounts are framed with an easy pinch-to-open clamp and a nice foam padding.
- Great for your YouTube videos, podcasting, online games. Package include Microphone Shock Mount, universal connector adaper.
SaleBestseller No. 5
Microphone Stand for Blue Yeti Snowball Quadcast Adjustable Suspension Boom Scissor Arm Stand with ShockMount Windscreen and Double layered Pop Filter Mic Holder Cable for Broadcasting Game
- 【Mic Stand with Shock Mount】: Luling Arts microphone arm with shockmount desgined for Blue Yeti, Yeti Pro ,Blue Snowball or mount most standard 1/4'' to 5/8'' adapter microphones.also comes 3/8'' to 5/8''Screw adapter.the mic arm with shock mount Max Support Weight is 70 oz/2 kg (4.4pound).
- 【Blue Yeti boom arm with shockmount】This Blue yeti boom arm Improved leg from hollow to solid ,no longer break or shake. more Stability Range of motion and stronger.Will not break the legs,the market will break the legs after 6 months of use.
- 【Mic Stand with Pop filter】:This adjustable blue yeti microphone stand comes double layer Pop Filter,mic foam cover,double reduce the plosive, wind interference, saliva spraying.free angle and height to show your perfect voice let you pick up any times.
- 【Upgraded table mounting clamp】:The microphone boom arm desk mount Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2.16"（The product is 6 cm） to fit most desktop.
- 【Microphone Arm Stand bundle 】Professional Recording Blue snowball Blue Yeti mic stand with Metal Shock Mount , double layer Pop Filter , Screw adapter,blue yeti microphone cover foam, Table mounting clamp with sponge pad,all in one for Blue mic stand desk.
Bestseller No. 6
Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Diameter 46mm-51mm Microphone
- Shock mount (size: 45mm-53mm，1.77inch-2.1inch ) for microphone type: Diameter of 46mm-51mm (1.8 inch-2 inch)microphone. Compatible with Many Condenser Mics Like AT2020, AT2020USB, AT2020USB+, AT2035, AT2020USB, ATR2500x.Please kindly measure your product dimension and confirm the same. If unsure if applicable, please leave your question.
- Pop filter (inner size: 40mm-61mm,1.6 inch-2.4 inch) for microphone head type: Diameter of 46mm-51mm( 1.8 inch-2inch) microphone. Please Verify your microphone size before ordering.
- Boom Arm Capability: The adjustable 3/8" to 5/8" screw adapter is easily attached to most of universal mic boom arm or mic stand.Please kindly measure your product dimension and confirm the same.
- Pop filter:U-shaped double net layer structure, foam layer, metal net layer can effectively reduce the plosive, wind interference, saliva spraying. Shock mount:Made of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, (It can not fit blue yeti), which make the microphone more convenient to install and prevente the microphone from falling.
- Package include Microphone Shock Mount + Pop Filter,and come with one universal connector adaper,Combination with these two making your broadcast or singing voice sounds more pleasant.
Bestseller No. 7
Boseen Universal Microphone Shock Mount, Mic Clip Holder Mount for Diameter 47mm-53mm Mic Anti Vibration Adjustable High Isolation Shock Mount
- Universal for many mic types - Our professional suspension shock mount is a nice accessory for condenser microphones diameter ranging from 47mm to 53mm, such as AT2020/2020USB+/2020USBi/2020 xlr/2035/2050/2500/2500USB, AKG P100/P200/P120/P420/C3000B, MXL V67g/V67i, Rode NT1A/NT1, Heil PR40, Razer seiren x, Berhinger C-1, ATR 2500 USB, Neumann TLM102 and so on.
- Great Design and Well-made - Made of solid metal and high quality elastic band. The mic shock mount features a highly flexible surround design that protects the microphone all-around, which make the microphone more convenient to install and prevent the microphone from falling.
- Adjustability and Flexibility - This microphone holder features an angle adjustment with locking knob, so that you can mount it on all the standard microphone stands.
- Anti Vibration and Noise - This mic holder can isolate studio condenser mics from most physical vibration, floor, and stand noise effectively, it will make your broadcast or singing voice sounds more pleasant.
- Please Note - 1. Package includes a microphone shock mount, a screw adapter and a elastic band. 2. The shock mount only fits mic diameter ranging from 47MM to 53MM. Please verify your microphone size before ordering!
SaleBestseller No. 8
Microphone Stand for Blue Yeti Snowball Quadcast Adjustable Boom Arm Scissor Mic Stand Desk Mount with Shock Mount, Windscreen and Double layered Pop Filter Mic Holder Cable for Broadcasting Game
- 【Mic Stand with Metal Shock Mount】: Luling Arts microphone arm with shockmount desgined for Blue Yeti, Yeti Pro ,Blue Snowball or mount most standard 1/4'' to 5/8'' adapter microphones.also comes 3/8'' to 5/8''Screw adapter.the mic arm with shock mount Max Support Weight is 70 oz/2 kg (4.4pound).
- 【Mic Boom Arm with shockmount】This Blue yeti boom arm Improved leg from hollow to solid ,no longer break or shake. more Stability Range of motion and stronger. Will not break the legs,the market will break the legs after 6 months of use.
- 【Mic Stand with Pop filter】:This adjustable blue snowball yeti microphone stand comes double layer Pop Filter,snowball mic foam cover,double reduce the plosive, wind interference, saliva spraying.free angle and height to show your perfect voice let you pick up any times.
- 【Upgraded table mounting clamp desk】:The microphone boom arm desk mount Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2.16"（The product is 6 cm） to fit most desktop.
- 【Microphone Arm Stand bundle 】Professional Recording Blue snowball Blue Yeti mic stand with Metal Shock Mount , double layer Pop Filter , Screw adapter,blue yeti microphone cover foam, Table mounting clamp with sponge pad,all in one for Blue mic stand desk.
Bestseller No. 9
Boseen Microphone Shock Mount Mic Holder - Anti Vibration Spider Shockmount Compatible with Many Condenser Mics Like AT2020 MXL 770 MXL 990 Samson G Track Pro Rode Procaster NT1-A Neumann U87 etc.
- Anti vibration and noise - This shock mount mic holder can isolate condenser mics from most physical vibration, floor, and stand noise effectively. And it’s ideal for recording, podcasting, broadcasting and more. It will make your broadcast or singing voice sound better.
- Applicable for many mic types - One shock mount is equipped with 4 different bottom screws, which can compatible with multiple microphone styles, for instance, AT(2020, 2020 USB), Rode(NT1-A, Procaster, Podcaster, K2, NTK, NT2000, NT2-A, NT1000), Samson(C01, C03, C01U, C03U, CL7, CL8), MXL(990, 770, R77, TEMPO, V67G, 2006), AKG(P120, P220, P420) , Blue(Ember, Bird SL, Babybottle SL, Spark SL except Yeti, Snowball, Nano), Neumann U87 and Scarlett Cm25.
- Durable and Adjustable-The shock mount was totally made of Heavy-duty solid metal, except the elastic band and pad. It also came with mounting pads to protect the bottom of the mic. Features an angle adjustable locking knob with a 5/8 inch screw hole, which can be easily attached to any universal mic boom arm or stand.
- ! NOTE ! - 1. The shock mount is not compatible with handheld mic, such as SM58, Q2U, ATR2100. 2. It’s also not suitable for many USB microphone with function knobs, such as Fifine, Blue Yeti/Snowball, Razer. (The threads’ diameters which are less than 20mm are not suitable. Many USB microphones’ bottom threads are 5/8 inch which is far less than 20 mm.) 3. Microphones without threads at the bottom cannot be tightened on our shock mount, such as AT2035/2050, Heil PR40.
- Best service - We promise to provide timely response within 24 hours and lifelong technical guidance.
Bestseller No. 10
ZRAMO TH106 Black Spider Universal Microphone Shock Mount Holder Adapter Clamp Clip 48-51MM Large Diameter Studio Condenser Mic Anti-Vibration Mic Holder for AT2020 AT2500
- Felt/foam insert to hold and protect microphone
- Fits most 48mm-51mm Microphones
- Material: metal
- PLEASE NOTE:SHOCK MOUNT come with 2 adapter screw( 1 gold and 1 black)